1911 3D FULL METAL SERIES – PUNISHER SERIES is hot cast in pure solid Bronze or .925 Sterling Silver. The 3d hot molten metal cast spring plug cap is them permanently affixed to either an Aluminum or Brass spring plug of our proprietary design. Each 3D metal spring plug is built to a level of detail that is not typically found in the gun industry American crafted pieces that are truly unique in the firearms industry.
Our 1911 Spring plugs will fit both Government model 5″ barreled 1911 handguns and the Commander series pistols with the 4-4.25″ barrels. Our Spring plugs are a drop in replacement for a standard style spring plug, NOT a hollow plug used with Full length guide rods. If your 1911 has a full length guide rod (typical of many Kimbers and some other makes), you can easily retro fit it with the short standard style “GI” guide rod and spring in our 1911 parts section, or from any online gun parts supplier.
You can retro fit your full length guide rod gun to use our plugs by simply swapping in a GI guide rod.CLICK HERE FOR OUR GUIDE RODS AND SPRING KITS!
Installation: Care must be taken when installing to not allow the sharp edge of the bushing to mar the 3D Insert. You can apply a small piece of masking tape on the face of the plug, then be sure to use a non marring 1911 bushing wrench to install the plug. If you do not have the ability or tools to install, we suggest a reputable gunsmith.